HEAT WAVE 7000*4100

HEAT WAVE 7000*4100
Κωδικός Προϊόντος: HEAT WAVE 7000X4000
Ποσότητα:

 SPRAY BOOTH HEAT WAVE 34KW DMDB 7000X4100   

 

OUTSIDE DIMENSIONS

7200mm*4100mm* 3600mm ( 400mm metal basement is included)

INSIDE DIMENSIONS

7000mm*4000mm*2750mm

MAIN ENTRACE

 3 folded doors with total width 2700mm and height 2650mm. Galvanized steel bended with rock wool insulation (white color). Security windows.

PERSONAL DOOR

 The entry and the exit of the person is achieved by one of these doors.

 OPTIONAL: Side door on panels with dimensions (2400 height x 900 width).

BASEMENT

  Raised metal base with full of grill and height.400mm. .Braking force from 650kg / wheel (standard) to 1000kg/wheel (extra).

OPTIONAL:  Floors full of grill and pneumatic elevated ramp in the inside of the cabin, to avoid trench construction in the building, and avoid the installment of the external ramp for car entrance

WALL PANEL

Sheet metal panels with rock wool insulation, electrostatic paint (white color) with thickness 50mm.

LIGHTING SYSTEM

 50 Led light tubes (5 led tubes into 10 boxes) placed on the top of the cabin (with 45 angle) 20 led tubes (2 led tubes into 10 boxes) mounted on panels with horizontal layout, in complete sealing boxes.

ROOF PANELS :

Galvanized sheet metal bended panels with 40mm thickness. Rock wool insulation.

CEILING FILTERS:

7 pieces ceiling filters :VILEDON  F-5 / EU-5 

AIR INLET EXHAUST UNIT:

AGGREGATE DIMENSIONS:L=4100mm*W=1350mm*H=3600mm Structure: Metallic structure and panels in galvanized double sheet iron, containing in between insulating material.

AIR INLET

 No1 centrifugal fan, direct couple on motor. Asynchronous three-phase motors 10HP ( 7.5 KW).Maximum air flow 26.000m3.Pocket filter   F3-EU5

EXHAUST UNIT:

No1 centrifugal fan, direct couple on motor. Asynchronous three-phase motors 10HP ( 7.5 KW).Maximum air flow 26.000m3.Pocket filter   F3-EU5

HEATING UNIT:

TOTAL 34 KW

14 HEAT WAVE PANELS

 4+4 endothermic panels placed on the sides of the booth

 2      endothermic panels placed on the rear side of the booth

 4      endothermic panels placed on the upper part of the booth

CONTROL PANEL:

 Nr.1 Control board with a touch screen display,set time/temperature/cabin pressure and an hardware for motor inverters. Automatic pressure in cabin .6 different programs: stand-by/painting/withering/drying/cooling. The same control panel allows the partial switch on of the left and right panels to be able to work only on the surface interested by the painting and drying cycle, with the minimum power consumption.

Σχετικά Προϊόντα